Products > Hardware

MSRP = $ 3 USD
Item: ROS-01-02
Stainless Steel Two Inch Ring.

2 Inch SS D-Ring
Stainless Steel Two Inch D-ring. Fits two inch (50 mm) webbing.
MSRP = $ 4 USD
Item: ROS-01-03

2 Inch SS Bent D-Ring
Stainless Steel Two Inch Bent D-ring. Fits two inch webbing.
MSRP = $ 4 USD
Item: ROS-01-04

Stainless Steel Bolt Snaps
Stainless Steel Small Bolt Snap 3/8”.
MSRP = $ 7.75 USD
Item: ROS-02-01
Stainless Steel Medium Bolt Snap.
MSRP = $ 8 USD
Item: ROS-02-03
Stainless Steel Extra Large Bolt Snap. A favorite among cold water divers.
MSRP = $ 16 USD
Item: ROS-02-04

SS Double Enders
Stainless Steel Medium Double Ender. Used on most safety spools.
MSRP = $ 8 USD
Item: ROS-03-01
Stainless Steel Large Double Ender.
4.625 Inches (11.74 cm) long.
Used for most primary reels.
MSRP = $ 9 USD
Item: ROS-03-02

SS Butterfly Bolt Snap
3/4 inch (19.05mm) Stainless Steel Butterfly Bolt Snap. Used by divers with dry gloves or mittens (Smurf Gloves).
MSRP = $ 9 USD
Item: ROS-02-05

SS Keeper / Tri-Glide
Stainless Steel Keeper / Tri-Glide. Fits two inch (5.08cm) webbing.
MSRP = $ 1 USD
Item: ROS-01-08

SS Belt Buckle Q-Release
Stainless Steel Belt Buckle. Fits two inch (50 mm) webbing.
MSRP = $ 10 USD
Item: ROS-04-01
Plastic / Composite Belt Buckle. Fits two inch (50 mm) webbing.
MSRP = $ 5 USD
Item: ROS-04-03

SS Fixed Bent D-Ring
Welded Fixed Bent D-Ring. Welded to a Keeper / Tri-Glide. Fits two inch (50 mm) webbing.
MSRP = $ 4 USD
Item: ROS-01-05

SS Sliding D-Ring
Sliding D-Ring. fits Two Inch Webbing. Can be easily adjusted under water.
MSRP = $ 20 USD
Item: ROS-01-06

SS D-Ring Holder
D-ring Holder (Taco). Used in conjunction with a worm gear clamp and a D-Ring.
MSRP = $ 2.30 USD
Item: ROS-01-07

SS Quick Link
One and one half inch Stainless Steel Quick Link.
MSRP = $ 2.70 USD
Item: ROS-07-01
Two inch Stainless Steel Quick Link.
MSRP = $ 3.25 USD
Item: ROS-07-20

Worm Gear Clamp
Stainless Steel Worm Gear Clamp. Fits 7.25 inch (18.415 cm) and 8 Inch (20.32 cm) diameter tanks. Used on Stage Bottles.
MSRP = $ 8 USD
Item: ROS-08-08

Plate Pad Bolt / Sex Bolt
Sex Bolt / Stainless Steel Attachment Bolt for securing plate pads to backplates or wings to back plates and more. Two are needed for Wings and and up to six for a Plate Pad. Both ends smooth to reduce friction. Each Bolt has a male an female section.
MSRP = $ 8 USD
Item: ROS-06-01
Products > Hardware