Rebreather

Products > Rebreather Accessories

Sodasorb HP - 4/8 Mesh

Sodasorb HP absorbs carbon dioxide in helium-oxygen breathing systems, hyperbaric chambers and scuba apparatus. Indicator Sodasorb, contains ethyl violet which changes color from white to purple as its capacity for absorption is exhausted. normal mesh size is 4-8 Tyler. Sodasorb HP is especially processed into porous, coral-like granules in order to expose the greater area of absorbent surface. In canisters these knobby granules permit free inter-granular circulation of gases. They have no flat surfaces to stack and block, and their hardness makes them highly resistant to powdering and breakage. Laboratory tests have proven Sodasorb HP to be fully effective 2-3 times as long as other absorbents. Standard 5-Gallon pails. 37 lbs Net Wt. Product Sheet

Mesh Size: 4-8 Mesh Grade

Pail Size: 5-Gallon / 18.9 Liters

MSRP = $ 85 USD

Item: RORB-05-01

Extreme RB Hose Protectors

Extreme Rebreather Hose Protectors. Comes as a pair. Can be rolled under to fit short rebreather hoses. The Extreme Rebreather Hose Protectors provide the greatest puncture and abrasion resistance than any hose protector we have made. This is the same material used in the Extreme Series Wings.

Puncture and abrasion protection is provided by the tiny, hard guard plates that are adhered to conventional and non-conventional base fabrics. Because the gap between guard plates is very small, it provides high levels of protection from sharp pointed objects and abrasion.

Length: 20 inches / 50 cm

MSRP = $ 50 USD

Item: RORB-01-02

Cordura RB Hose Protectors